Remote Control Buttons And Functions; Tv Buttons And Functions - JVC AV-21B17 Instructions Manual

Remote control buttons and functions

Select PICTURE MODE (\ page 5)
RETURN PLUS function
Return to the frequently viewed channel.
Choose the channel you want to programme
Press and hold
To cancel
Press and hold
RETURN function
If you have not set or have canceled the RETURN PLUS
channel, this will return to the previously viewed channel.
Display the programme number or video terminal number.

TV buttons and functions

*This illustration shows AV-14UMG7.
Select Channel
Video and audio input jack
Headphone jack
4
RETURN PLUS
PROGRAMMED!
RETURN PLUS
CANCELED!
Adjust volume level
Display the TV's MENU,
Exit after fi nish setting
Turn the TV on from standby and vice versa
Set OFF TIMER (\ page 7)
Select ECO MODE (\ page 5)
Select the programme number
For two digits programme number
Select TV or video input
Operating the menus (\ page 5)
Turn the volume Off / On
Adjust the volume level, Turn off Muting
Select Channel
For Hyper Scan :
Press and hold
POWER /
ON TIMER
Remote control TV's main
sensor power on/off
PR changes without changing the picture. Once
you stop pressing CHANNEL+ or CHANNEL-
button, picture will change to the desired PR.
POWER lamp - Indicates the TV's status.
No colour : TV's main power is being turned off.
Red : TV's main power is being turned on.
Blink : While the TV is in standby mode, ON
TIMER function is in used. While the
TV is in turn on mode, OFF TIMER
function is in used.
Note: When you turn off the power switch while
TV is in standby mode, the power lamp will go
off in 5 -10 seconds. When you operate the TV,
POWER Lamp will blink.