Dimplex DACDEHU2 User Manual
Dimplex DACDEHU2 User Manual

Dimplex DACDEHU2 User Manual

Advertisement

Quick Links

Model DACDEHU2 Dehumidifier
Please read this manual carefully before use and keep it for future reference.

Advertisement

Table of Contents
loading

Summary of Contents for Dimplex DACDEHU2

  • Page 1 Model DACDEHU2 Dehumidifier Please read this manual carefully before use and keep it for future reference.
  • Page 2: Safety Instructions

    9. Always keep the unit in vertical position. 10. Let the unit to stand for one hour before connecting to the mains supply after transport or when it has been tilted (e.g. during cleaning). SPECIFICATIONS. DACDEHU2 Power supply 240V/50Hz Moisture removal capacity...
  • Page 3: How It Works

    HOW IT WORKS. This product is a dehumidifier. It controls relative humidity by passing the air through the unit, forcing the excess moisture to condensate over the cooling elements. Contact with this cold surface causes the moisture in the air to condense.This condensed water then drains safely into the water tank.The dried air then passes through the condenser where it is slightly warmed and re-enters the room at a slightly elevated temperature.
  • Page 4: Operation

    OPERATION. Control panel outlet Handle Air vent Power cord Cord hanger Water tank Drain hole for Water continuous level drainage display Caster Active carbon filter Filter retaining frame Plastic filter...
  • Page 5: Emptying The Water Tank

    OPERATION. Humidistat Water Full Indicator Fan speed switch Turning ON/OFF Set the humidistat (humidity controller) to required humidity level (the intensity of humidity extraction is increased clockwise) For continuous working, set the humidistat to position 'MAX'. To turn off the unit, turn the humidistat to position 'OFF'. Note! The 'WATER FULL' indicator will light up if the tank is full or has not been correctly fitted.
  • Page 6: Continuous Drainage

    CONTINUOUS DRAINAGE. When the dehumidifier is operated at very high humidity levels, the water tank will require more frequent drainage. In this situation, it may be more convenient to set the unit up for continuous drainage with the following procedures: 1.
  • Page 7: Troubleshooting

    TROUBLE SHOOTING. THE UNIT DOES NOT OPERATE: • Is the unit plugged in? • Is the room temperature below 5°C or above 35°C? If so, then it is out of the working range of the unit. • Ensure the humidistat (or ON/OFF switch) is turned on. •...

Table of Contents