Remote Programming; Setting Catv, Vcr And Dvd Codes; Catv Or Satellite Codes - JVC I' Art Pro AV-32DF74 User Manual

Remote Programming

Setting the CATV, VCR and DVD Codes
You can program your remote to operate your cable box, satellite receiver, VCR or DVD
player by using the instructions and codes listed below. If the equipment does not respond
to any of the codes listed below or to the code search function, use the remote control
supplied by the manufacturer.
Cable Box or Satellite Codes
The remote control is programmed with cable box and satellite codes for power on/off,
channel up/down, and 10 key operation.
1) Find the cable box or satellite brand from the list of codes shown below.
2) Slide the 2-way selector switch to "CATV".
3) Press and hold down the D
key pad.
4) Release the D
ISPLAY
• If your cable or satellite box does not respond to the first code, try the others listed. If it does
not respond to any code, try the search codes function, on page 25.
22
button, then enter the first code number listed with the 10
ISPLAY
button, and confirm the operation of the cable box/satellite receiver.