Dvd Codes - JVC AV 27260 User Manual

Remote Programming
DVD setup
The remote control is programmed with DVD codes for power on, power off, play, stop,
fast-forward, rewind, previous chapter, next chapter, tray open/close, and still/pause operation.
1) Find the DVD player brand from the list of codes shown below.
2) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "DVD".
3) Press and hold down the D
4) With the D button held down, enter the first code number listed with the 10 key pad.
ISPLAY
5) Release the D
ISPLAY
6) Confirm the operation of the DVD player.
• If your DVD player does not respond to the first code, try the others listed. If it does not respond
to any code, try the Search Codes Function, on page 50.
• After you program your remote, some DVD buttons may not work properly. If some buttons do not
work properly, use the remote control which came with your DVD player.
DVD Player
Aiwa
Apex
Denon
Hitachi
JVC
Kenwood
Konka
Mitsubishi
Onkyo
Oritron
Panasonic
Philips
Pioneer
20
button.
ISPLAY
button.
CODES
043
040
020, 037
030, 031
000
035
039
025
041
044
020
023, 036
022
DVD Player
033
Raite
RCA 021, 026
Sampo 034
Samsung 030
Sharp 028
Silvania 038
Sony
024, 045, 046,
047
Technics 020
Toshiba 023
Wave 042
Yamaha 020
Zenith 027, 032
CODES