Download Print this page

Stroller Adjustments; Reclining Backrest; Super Canopy - CYBEX RUBY 2011 Owner's Manual

Ruby 2011 cybex stroller
Hide thumbs Also See for RUBY 2011:

Advertisement

Available languages

Available languages

Stroller adjustments

Reclining Backrest

Seat back adjusts to two positions.
To recline, push from behind on both seat hooks
to release seat from the front tubing
reattach hooks to the rear tubing.
To raise the seat, hook seat into front tubing.
Hooks mUST be engaged while stroller is
in use.

Super Canopy™

The Canopy has a fully ratcheting function to
create complete coverage. Simply pull on the
front of the Canopy to the desired position. The
height can easily be adjusted by simply sliding
the Canopy up or down the frame. The entire
Canopy can also be tilted forward. For maximum
coverage, unzip the extra panel on top of
canopy and pull forward.
The canopy flap at the rear of the stroller can be
rolled up and affixed with the velcro fastener.
8
and
This stroller is equipped with a five point safety
harness for your child's safety.
aLWaYS ensure that your child wears the
complete harness that is correctly fitted
and adjusted at all times.
Harness Fit
Attach both Buckle Tongues
into the Harness
Buckle. To achieve a snug fit adjust each strap
to the desired length.
Changing Harness Height
This stroller features three Shoulder Harness
Positions for the safety and comfort of your child.
aLWaYS USe a harness position located
aBOVe the child's shoulders. If all harness
positions are above the child's shoulders,
use the one closest to the shoulders.
Simply twist Shoulder Strap end buckles and
feed through holes in the seat fabric.
adjusting the Harness
9

Advertisement

loading