Advertisement
Quick Links
PET VAX Specifications
PET VAX SPECIFICATIONS
Weight ........................... Net 8.0Kg
Size................................ Height 54cms x 34cms diameter
Motor ............................. 1200 watts max. / 450 watts min variable power. 2 stage bypass
motor completely insulated and sealed against water contamination.
Structure........................ Moulded high-impact resistant ABS – a higher grade material than
the average car bumper.
Dust Bags ...................... Supplied with machine.
Clean Water Reservoir .... 4 litres of clean water.
Hose .............................. 1.8m long, crush resistant hose with 360 (degree) swivels at each
end for tangle free cleaning and maximum access.
Recovery Bucket ............ 8 litre capacity.
VAXCARE
For further assistance or advice about any
VAX home-care appliance please call VAXCARE on
1300 36 4040
0800 800 900
or
VAX Appliances (Australia) Pty Ltd
A.C.N. 009099736
296 Victoria Road Malaga Western Australia 6090.
EMAIL: vaxcare@vax.com.au WEBSITE: www.vax.com.au
(Australia - cost of a local call)
(NZ)
DRY VACUUMS • WASHES CARPETS & UPHOLSTERY • PICKS UP SPILLS • CLEANS HARDFLOORS • PICKS UP AFTER PETS
Advertisement
Related Manuals for Vax CANISTER
Summary of Contents for Vax CANISTER
- Page 1 Recovery Bucket .... 8 litre capacity. VAXCARE For further assistance or advice about any VAX home-care appliance please call VAXCARE on 1300 36 4040 (Australia - cost of a local call) 0800 800 900 (NZ) DRY VACUUMS •...
-
Page 2: Parts Checklist
• Don’t let anyone touch the rotating brush bar (where fitted) unless If your VAX is sold or transferred to a new owner, this guide should be your VAX is disconnected from the mains. passed on so that the new owner can become acquainted with the •... - Page 3 Wash filter it in warm water. Squeeze it dry and replace it. within the washing range. Turn higher than Your VAX will work more efficiently if the Bondini filter is minimum wash setting for uneven or higher pile if replaced with a new one occasionally.
- Page 4 Fit a dust bag by pushing it firmly into the recovery bucket before connecting hose If the water in your sink is soapy, VAX Defoamer will be required in the recovery bucket. Refer to instructions on Defoamer bottle. Pour Defoamer Push the connector on the end of the hose.
- Page 5 1 Vacuum the area you intend to wash Turn you VAX on. Suck up the spill keeping the spill 2 Remove the motor unit, filter unit, hose, dust bag pick-up facing down. Do not overfill above the max and vacuuming tool level mark.
- Page 6 How to wash carpets How to wash upholstery 1 Set up your VAX as described on page 5 1 Set up your VAX as described on page 5, BUT don’t use the extendible metal wand 2 Switch ON 2 Connect the upholstery washing tool to the short...