Pip On/Move; Freeze; Swap; Channel -/+ For Pip - JVC AV 27050 User Manual

2 B U T T O N
8
ON/MOVE (Picture in Picture)
NOTES:
PIP allows you to view two pictures
simultaneously.
Picture in Picture is
available on the
following models
only:
• AV-36050
• AV-32050
• AV-27050
Note: The PIP channel and main
screen channel will appear in the
display momentarily right after you turn
on PIP. You can leave them up
permanently by pressing D
you reach the mode.
Note: The PIP Screen is 1/9 of the
regular screen size.
Once PIP is turned on, the O
button operates the Move feature.
You can move the PIP window to any of
the TV's four corners.
Note: Each press of the On/ M
button will shift the PIP window one
position.
Note: When the PIP screen has no
signal, the PIP window will be blue.
F U N C T I O N S
(PIP) O /M
N OVE
07
02
E to turn PIP off
XIT
ISPLAY
O /M
N OVE

FREEZE

You can freeze the picture in the main
screen into the PIP window.
Note: When the PIP is off, pressing
F
REEZE
screen and puts it into the PIP
window... great for catching those mail
order addresses.
Note: When the PIP is on F
the PIP picture.

SWAP

You can swap the PIP picture and the
main picture.
until
CHANNEL –/+ For PIP
Change the channel in the PIP window.
/M
N OVE

SOURCE

You can select the source for the PIP
window.
50 Series models have 2 Tuner PIP and can see
two signals at once. This means you can view two
In order for PIP to work, the TV must be set to "TV
OVE
If you use your VCR to play a video, the VCR will
automatically switch your input to VCR mode. In
VCR mode, the TV sees only one signal, that of
the VCR. In order to view PIP, you then need to
press the TV/VCR button on your VCR remote to
F
REEZE
takes a snapshot of the main
REEZE
S
WAP
C –/+
H
S
OURCE
TV V-1 V-2
PIP NOTES
channels at the same time.
mode".
switch back to TV mode.
stops