Connecting the TV and
receiver
Use the supplied system cable to connect the
TV to the receiver.
The two connectors are of different shapes.
Ensure that the pins on connector 1 are
oriented correctly, press the connector into
the socket, and tighten the screws at left and
right to lock it in place.
Press connector 2 firmly into place until it is
locked.
1
Disconnecting the system cable
Release connector 1 by unscrewing the
screws at left and right and removing it from
the socket.
Release connector 2 by removing it from the
socket while pressing the release bottoms on
either side.
1
Connecting the aerial and
video cassette recorder (VCR)
2
2
• Aerial cable is not supplied. Use a good
quality 75-ohm coaxial cable.
• Read the manual that came with the VCR
before connecting.
If not connecting a VCR (see Fig. A):
Connect an aerial cable to the aerial
socket on this receiver.
Fig. A
Back of the receiver
AUDIO
CENTER
OUT
CHANNEL
INPUT
R
L
Pr
Pb
Y
DVI
ANALOG
AUDIO
IN
IN
VIDEO-1
R
AUDIO L/MONO VIDEO
IN
Pr
Pb
Y
VIDEO-3
IN
VIDEO-2
R AUDIO L
VIDEO
R AUDIO L
VIDEO
Connections
R
L
SUB WOOFER
OUT
R AUDIO L
VIDEO
S-
OUT
VIDEO
AC IN
S-
110~240V
VIDEO
9