Register A Handset; Select A Base; Unregister A Handset; Pin - Motorola D1001 User Manual

Register a handset

At the base:
p
1. Press and hold the button on the base station for at least 3 seconds. The base station
emits a beep when it is ready to accept registration. You have 90 seconds in which to register
a handset.
At the handset:
m d
1. Press and scroll to ADVANCED SET
d m
2. Scroll to REGISTRATION and press .
u d
3. If necessary, scroll or to display REGIST. BASE
the registered base number is flashing. Enter the number of the base on which you wish to
register your handset.
1
If you have only 1 base station, press
4. When the display shows PIN----, enter the base PIN.
- When the handset registers with the base, it is assigned a handset number.

Select a base

You can register your D1000 handset with up to 4 bases. Once registered, you can switch
between bases, for example, bases at home and at work.
m d
1. Press and scroll to ADVANCED SET
d m
2. Scroll to REGISTRATION and press .
m
3. SELECT BASE is displayed. Press .
- The available bases are displayed with the current base number flashing.
4. Enter the number of the base you want – 1,2,3 or 4 and press
- When the base is found you hear a beep. If not found, the display shows UNREGISTERED.

Unregister a handset

m d
1. Press and scroll to ADVANCED SET
d m
2. Scroll to UNREGISTER and press .
m
3. Enter the 4 digit master PIN and press
- Display shows the registered handset numbers.
u d
4. Scroll or to select the handset you want to delete and press
- UNREGISTERED is displayed on the handset screen.

PIN

The 4-digit master PIN is used when registering or unregistering a handset and when changing
some settings on your D1000. The default setting is 0000. You can change this PIN for more
security.
m d
1. Press , scroll to ADVANCED SET and press
d m
2. Scroll to PIN. Press .
3. Enter the current 4 digit master PIN and press
m
4. Enter the new PIN and press .
NOTE
Make a note of your PIN. If you forget your PIN you will need to reset your product.
Advanced settings
m
and press .
m
and press . BASE 1 2 3 4 is displayed and
1
. If you have 2 base stations, press or
m
and press .
m
.
m
and press .
.
m
.
m
.
m
. (Default setting 0000).

Reset

This will reset your D1000 to its default settings.
m d
1. Press , scroll to ADVANCED SET
d
2. Scroll to RESET UNIT. Press
3. CONFIRM? is displayed. Press
NOTE
Entries stored in the phonebook are retained.

Default settings

Handset name
Key tone
2
, etc.
First ring
Auto pick up
Auto hang up
Ringer melody
Ringer volume
Earpiece volume
Phonebook
Call log
Redial list
Master PIN
Keypad lock
Clock
Alarm
Dial mode

Auto prefix

You can set the D1000 to detect a dialling number and replace it with another number. The
number to be detected can be up to 5 digits long. It can be replaced with a number up to 10 digits.
m d
1. Press , scroll to ADVANCED SET
d m
2. Scroll to PREFIX. Press
3. DETECT DIGIT is displayed. Press
4. Enter the number you want to be detected and press
5. Scroll to PREFIX NUM. and press
6. Enter the number you want it replaced with and press
>
7. Press to return to standby.
m
and press .
m
.
m
.
Handset
On
On
On
On
Melody 1
High
3
Unchanged
Empty
Empty
0000
Off
00:00
Off
Tone
m
and press .
.
m
.
m
.
m
.
m
.
19