Pioneer BDP-3110 Operating Instructions Manual page 29

5. Press ENTER to enter language setting.
Press a/b select to language.
6. Press ENTER to enter Resolution setting.
Press a/b to select an option. Press ENTER.
Use a/b to select an "Yes" or "No".
7. Press ENTER to enter Aspect ratio setting.
Press a/b to select an option. Press ENTER.
8. Press ENTER to return Gereral Setting
Menu.
• [System Upgrade]
You may select to Upgrade the software from
the disc or USB flash drive.
1. Insert the disc or connect the USB flash
drive which contains the upgrade file
package.
2. Follow the instruction on the TV screen to
confirm upgrade operation.
- Upgrade complete the software, the
system will reboot after 5s or Enter key is
pressed.
Notes:
• Do not unplug the power cord or remove
the USB flash drive/disc during software
updating. Also, do not press the reset button
during updating. Otherwise, the updating will
be aborted and malfunction may occur with
the player.
• If the upgrade file package did not pass
the verification, error prompt is displayed ,
check the package again (such as the
package is not complete)
• Make sure the firmware version is not an
old version.
• [DISC Auto upgrade]
When you are opening BD and put the disc,
BD may auto upgrade using the disc.
{ On } - Turn on disc auto upgrade mode.
{ Off } - Turn off disc auto upgrade mode.
• [BUDA]
During insert more than 1GB empty USB
device, you can operate BD-Live function.
And Blu-ray DVD system will be automatic
name a BUDA content.
BUDA will display Information.
1. Press ENTER.
2. Follow the instruction on the TV screen to
select {BUDA Information}.
3. Press ENTER to select "Fmt buda", BUDA
of files will be cleaned.
• [Quick Start]
{ On } - Select to shorten the required time to
boot up.
{ Off } - Select to perform normal bootup.
05
29