Operating Environment - Pioneer BDP-3110 Operating Instructions Manual

Thank you for buying this Pioneer product.
01
Please read through these operation instructions so you will know how to operate your model
properly. After you have finished reading the instructions, put them away in a safe place for
future reference.
IMPORTANT
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
CAUTION
This product is a class 1 laser product classified
under the Safety of laser products, IEC 60825-1:2007.
CLASS 1 LASER PRODUCT
VENTILATION CAUTION
When installing this unit, make sure to leave
space around the unit for ventilation to im-
prove heat radiation (at least 10 cm at top, 10
cm at rear, and 10 cm at each side).
WARNING
Slots and openings in the cabinet are
provided for ventilation to ensure reliable
operation of the product, and to protect it
from overheating. To prevent fire hazard, the
openings should never be blocked or covered
with items (such as newspapers, table-cloths,
curtains) or by operating the equipment on
thick carpet or a bed.
WARNING
This equipment is not waterproof. To prevent
a fire or shock hazard, do not place any
container filled with liquid near this equipment
(such as a vase or flower pot) or expose it to
dripping, splashing, rain or moisture.
2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
D58-5-2-2a_A1_En
WARNING
Before plugging in for the first time, read the
following section carefully.
The voltage of the available power supply
differs according to country or region. Be
sure that the power supply voltage of the
area where this unit will be used meets the
required voltage (e.g., 100-240V) written on
the rear panel.

Operating Environment

Operating environment temperature and hu-
midity:+5 °C to +35 °C (+41 °F to +95 °F);
less than 85 %RH (cooling vents not blocked)
Do not install this unit in a poorly ventilated
area, or in locations exposed to high humidity
or direct sunlight (or strong artificial light).
WARNING
To prevent a fire hazard, do not place any
naked flame sources (such as a lighted) on
the equipment.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
D3-4-2-1-1_A1_En