Whirlpool ET20DK Use & Care Manual page 6

4djusting the refrigerator shelves...
Shelves can be adjusted to match the way you use
your refrigerator. Glass shelves are strong enough
to hold bottles, milk and other heavy food items.
GLASS SHELVES
HEAVY. BE CARE
Removing freezer shelf...
1.
Lift
front slightly
2. Lift back off supports
3. Replace in reverse order
To remove glass shelves:
1. Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace glass shelves:
1. Guide the rear hooks into the slots In the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
,4djusting the door shelves...
To remove door shelves:
1. Loft up shelf
2. Trlt up at front
3. Pull shelf straight out
To replace door shelves:
1. Tilt up front of shelf until
hooks fit into slots in the
shelf support
2. Lower front of shelf to level
position.
3. Push shelf down
Removing crispers and crisper cover...
PULL OUT TO STOP, LlFl THE FRONT
AND PULL AGAIN
REMOVE THE
GLASS INSERT,
LIFT THE FRAME
THEN THE BACK
GLASS IS HEAVY.
BE CAREFUL.
To remove the crispers:
1. Slrde crisper strarght out to stop, Ilft front, then
slide the rest of the way out
2. Replace in the reverse order
To remove the cover:
1. Push up glass insert from bottom, then slide out
wrth both hands
2. Lift front of cover frame
3. Loft out cover frame by pulling up and out
4. Remove metal cover support.
To replace the cover:
1. Replace metal cover support on wall supports
in front section of cabinet.
2. Fit back of corner into notch supports on walls of
refrigerator, then lower into place.
3. Slrde back of glass insert into place, then lower
front