Whirlpool ET20DK Use & Care Manual page 5

Using your refrigerator
/
I
\
REFRIGERATOR CONTROL
INDICATOR LIGHT
POWER &NC CONTROL
LIGHT SWITCH FREEZEbONTROL
Setting the controls...
Controls for the refrigerator and freezer ore In the
Give the refrigerator time to cool dowr
refriaerator. When the refrigerator IS plugged in for
pletely before adding food. (This may tal
These s&tings should be about right for nor-
2. Set the FREEZER
nALITnT\, TA r\
mal household refrigerator usage.
The controls will be set about right when milk or
juice is as cold as you like and when ice cream iS
firm
10 aajusl a conrrol,
reach under the console
and turn the knob.
Refrigerator Control adjustments range from 1 to
8. Freezer Control adjustments range from A to D.
Changing the control settings...
If you need to adjust temperatures In refrigerator
or freezer, use the settings listed In the chart below
l
Adjust the Refngerator Control first
l
Wart at least 24 hours between adjustments
l
Then adjust the Freezer Control if needed
CONDITION:
If Refrigerator
Section IS
TOO WARM
If Freezer
Section IS
TOO WARM
QUESTIONS?
cc111 your
If Refrigerator
COOL-LINE" Section IS
service
TOO COLD
assistance
telephone
If ICE isn't
number
MADE FAST ENOUGH
(page 16).
If BOTH SECTIONS
ore TOO WARM
REASON:
Door opened often
Large amount of food added
Room temperature too worm
Door opened often
Large amount of food added
Very cold room temperature
(can't cycle often enough]
Controls not set correctly
for Your conditions
RECOMMENDED
CONTROL SETTINGS:
Refrigerator 6
Freezer
D
Refngerator
4
Freezer A
Refrigerator 2
Freezer A
Heavy ice usage
Very cold room temperature
(can't cycle often enough]
Door opened often
Large amount of food added
Very worm or very cold
room temperatures
Refrigerator
Freezer
Refrigerator
Freezer
6
C
Power Saving Control...
The Power Saving Control on the Control Con-
sole operates electric heaters around the door
openings. These heaters help keep moisture from
forming on the outside of the refrigerator
POWER,SAVlNG CqNTPOL
1. Use the "CONSUMES LESS ENERGY" settrna when
2.
humidity is low.
Use the "REDUCES EXTERIOR MOISTURE" setting if
moisture forms on the outside of the refrigerator
The indicator light will glow when the switch IS in
the "REDUCES EXTERIOR MOISTURE" position