2. Insert the ON pin at the time you
want the device to turn on again.
3. Set the timer's ON/OFF switch to ON
so the device starts in that state.
Set up to four extra intervals as needed.
n
Note: Push pins down firmly until
you hear a click.
3
Set the time dial
Rotate the dial clockwise to align the
TIME arrow with the scale marking the
approximate current time. The white
scale is for AM, and black is for PM.
n
Note: In case of power failure, rotate
the dial again to adjust the correct current
time.
4
Make connections
As soon as you set the timer, plug your
device into the timer, then plug the timer
into a wall outlet. Turn on your device.
4