Audio1 Gain And Audio2 Gain Menus - Motorola DSR4410 Operator's Manual

3
If you select Dual Mono, a warning screen will appear. The warning screen is needed
because of possible conflicts between this menu and the channel selection menus that
specify audio language. It appears if the user had previously used the Language menu
(channel selection group) to select a single language for Mono or Stereo output and then
changed to Dual Mono output. The unit will now seek to have a language defined for both
left and right dual mono outputs.
• By pressing the Enter button (ignoring the caution and taking no action in the Lang
menu of the channel selection group), the unit will change to Dual Mono, and it will use
the language previously selected for Mono (or Stereo) for both.
• Conversely, if the user had previously selected Dual Mono output in two languages, but
later changed to Stereo or Mono output in this menu, the output will default to the Dual
Mono language that has been defined for the left channel.
Compress Field
Press the4button until the cursor is at the Compress label, and press the Enter button to
move into the field. This field allows control of the degree of audio level compression. The
options are Heavy, Moderate, and Off. The default setting is Off. Press the56buttons to
display the options. Press the Enter button to confirm the selection.

Audio1 Gain and Audio2 Gain Menus

Press the56buttons until the Audio1 Gain menu or Audio2 Gain menu appears. These
menus allow adjustment of the audio signal output level from 0 to -20dB in 1dB
increments.
20
CAUTION: Check audio language selection
Press E to continue or
AUDIO1 GAIN Mode
E Independent dd
AUDIO2 GAIN Mode
E Joint
to stop
Left Right
dd
Left Right
dd dd