Audio 1 And 2 Menus - Motorola DSR4410 Operator's Manual

Polar Field
This field allows the selection of a polarity, when the Manual option in the Mode field is
selected. Press the4button until the cursor is at the Polar label. After pressing the Enter
button to enter this field, press the56buttons to display the options: H/LHP (Horizontal/
Left-Hand Polarity) or V/RHP (Vertical/Right-Hand Polarity). Select a polarity and press
Enter to exit the field.
This field is not editable when the Auto option in the Mode field is selected. This field
displays the polarity to which the port is related. This field will display the default when
the port is not related to a satellite. The defaults for port 0 and port 1 are H/LHP and V/
RHP, respectively.

Audio 1 and 2 Menus

Press the56buttons until an Audio1 menu or Audio2 menu appears. These menus have
three fields that allow the user to customize the audio output based on options provided by
the Dolby digital compression system.
DialNorm Field
Press the4button until the cursor is at the DialNorm label. This field allows the user to
normalize speech levels to a constant level over all channels—raising or lowering the
volume of the dialogue to a level that is appropriate for the background sound track. Press
the Enter button to move into the field. There are two options, On and Off. The default
selection is On. Press the56buttons to change the setting. Press Enter to confirm
selection.
AudioMix Field
Press the4button until the cursor is at the AudioMix label, and press the Enter button to
move into the field. This field allows selection of the audio downmix options. The choices
are Stereo, Surround, Mono, or Dual Mono (two completely different audio outputs on the
left and right channels, usually in different languages). Press the56buttons to display the
options. The default setting is Stereo.
DSR4410
AUDIO1 DialNorm AudioMix
E On Stereo
AUDIO2 DialNorm AudioMix
E Off Dual Mono
Operating the DSR4410
Compress
Moderate
Compress
Heavy
19