Honda 1994 Civic Owner's Manual page 154

Main Menu
Replacing a Rear License
Bulb
1. Open the trunk.
Use a Phillips-head screwdriver
to remove the two mounting
screws.
2. Pull the assembly away from the
bracket.
3. Remove the socket from the
light assembly by turning it one-
quarter turn counterclockwise.
Table of Contents
4. Pull the bulb straight out of the
socket.
5. Install the new bulb. Test it to
make sure it works.
6. Reinstall the light assembly on
the bracket. Install the mounting
screws and tighten them secu-
rely.
Replacing Interior and Trunk
Light Bulbs
INTERIOR LIGHT
1. Remove the lens by carefully
prying on the edge of the lens in
the middle with a fingernail file
or a small flat-tip screwdriver.
Do not pry on the edge of the
housing around the lens.
Maintenance
Lights
CONTINUED