Main Menu
Lights
Replacing Rear Bulbs
1. Open the trunk.
When replacing a bulb in the
right assembly, remove the jack
first.
2. Use a Phillips-head screwdriver
to remove the two screws and
pull off the lining.
Maintenance
Table of Contents
3. Determine which of the four
bulbs is burned out: tail/stoplight,
back-up light, turn signal, or side
marker. Remove the socket for
that bulb by turning it counter-
clockwise.
4. To remove the tail/stoplight bulb,
back-up light bulb or the turn
signal bulb, push it in slightly and
turn it counterclockwise. To
remove the side marker bulb,
pull it straight out of the socket.
5. Install the new bulb in the socket.
Insert the socket back in the
taillight assembly and turn it
clockwise to lock it in place.
6. Test the new bulb. Put the lining
back and tighten the two screws.