Computer Setup Menu - Compaq Deskpro EN Series Maintenance & Service Manual

2.4.2

Computer Setup Menu

Heading
File
Storage
Security
2-6 Software Reference
Option
System Information
Set Time and Date
Save to Floppy
Restore from Floppy
Set Defaults and Exit
Ignore Changes and Exit
Save Changes and Exit
Diskettes
Removable Media
IDE Devices
IDE Drive Timing
IDE Drive Translation
Boot Order
Setup Password
Power-On Password
Password Options
Smart Cover
Device Security
Description
Lists product name, processor type/speed/stepping, CPU
serial number, system ROM date, system board revision,
installed memory size, and asset tracking number.
Allows you to set system time and date.
Saves system configuration to a blank 1.44-MB diskette.
Restores system configuration from a diskette.
Restores factory default settings.
Exits Computer Setup without applying or saving any
changes.
Saves changes to system configuration and exits
Computer Setup.
Lists the currently installed drive A (preinstalled diskette
drive) and drive B devices.
Enables/disables removable media booting and removable
media writing.
Note: After saving changes to Removable Media, the
computer will restart. Turn the computer off, then on,
manually.
Lists information regarding IDE devices connected to the
system. ATAPI devices (CD-ROM, DVD-ROM, tape) are
listed as ATAPI devices.
Allows you to set hard drive to Ultra-DMA (Ultra-ATA),
EDMA, or PIO mode operation.
Enables/disables IDE drive translation.
Allows you to specify boot order of installed peripheral
devices (such as LS-120 drive, diskette drive, hard drive,
SCSI drive, CD-ROM drive, or DVD-ROM drive).
Enables setup (administrator) password.
See the "Security Management" section of this guide for
more information.
Enables power-on password.
Specifies prompting for Power-On Password.
See "Security Management" for more information.
Enables/disables network server mode, keyboard
QuickLock, QuickBlank screen when locked, and
QuickLock in energy saver mode.
See "Security Management" for more information.
Note: This selection will appear only if a power-on
password is set.
Enables/disables Smart Cover Sensor and Cover Lock.
Also lists most recent cover removal. (Feature supported
on select models only.)
See "Security Management" for more information.
Enables/disables serial, parallel, and USB ports and audio
security.
continued