CEN-TECH 69096 Operating Instructions Manual page 3

7 function digital multimeter
Hide thumbs Also See for 69096:
Table of Contents

Advertisement

Read all instructions before using this tester!
1.
Avoid working alone. If an accident happens, an assistant can
bring help.
2.
Keep work area clean. Cluttered areas invite injuries.
3.
Avoid electrical shock. Use extreme caution when using this tool
near uninsulated conductors or bus bars. Prevent body contact with
grounded surfaces such as pipes, radiators, ranges, and cabinet
enclosures when testing voltages.
4.
Avoid damaging meter. Use only as specified in this manual.
5.
Observe work area conditions. Do not test voltages in damp or
wet locations. Don't expose to rain. Keep work area well lit.
6.
Keep children away. Children must never be allowed in the work
area. Do not let them handle machines, tools, or extension cords.
7.
Store idle equipment. When not in use, tools must be stored in a
dry location to inhibit rust. Always lock up tools and keep out of reach
of children.
8.
Dress properly. Do not wear loose clothing or jewelry as they can
be caught in moving parts. Protective, electrically nonconductive
clothes and nonskid footwear are recommended when working. Wear
restrictive hair covering to contain long hair.
Use eye protection. Always wear ANSI approved impact safety
9.
goggles.
10.
Do not overreach. Keep proper footing and balance at all times.
Do not reach over or across electrical cables or frames.
11.
Maintain tools with care. Ensure multimeter has a fresh battery.
Inspect test leads periodically and, if damaged, have them repaired
by an authorized technician.
12.
Stay alert. Watch what you are doing, use common sense. Do not
operate any tool when you are tired.
Check for damaged parts. Before using any tool, any part that
13.
appears damaged should be carefully checked to determine that it
will operate properly and perform its intended function. Check for any
broken parts and any other condition that may affect proper operation.
Any part that is damaged should be properly repaired or replaced
by a qualified technician. Do not use the tool if any switch does not
operate properly.
SKU 69096
For replacement parts, please call 1-800-444-3353.
Page 3

Advertisement

Table of Contents
loading

Table of Contents