DRIVE CHAIN
FINAL DRIVE OIL
Refer to Maintenance Precautions page 56.
Change the oil as specified in the maintenance schedule
page 52.
NOTE:
Change the oil with the final drive at normal operating
•
temperature and the motorcycle upright on firm, level
ground to assure complete and rapid draining.
1. To drain the oil, remove the oil filler cap and drain plug.
2. After th oil has completely drained, check that the sealing
washer on the drain plug is in good condition and install
the drain plug.
Drain Plug Torque: 12N-m ((1.2 kg-m, 9 ft-lb)
3. Fill the final drive with approximatley 150cc (5.1 oz) of the
recommended oil. Make sure the final drive oil level is
slightly lower than the lower edge of the inspection hole.
4. Install the oil filler cap.
Recommended oil: HYPOID GEAR OIL SAE 80
69