12
EN
Before installing, confirm your Windows
Control Panel and select General tab.
FOR WINDOWS
Before you use the DVC Capture Board, you must install the DV Capture Board drivers. If you
have not done so already, install the DV Capture Board (See p. 8). Follow these steps to install
the drivers:
1
Turn on your computer. Put the included
JVC CD-ROM in your CD-ROM drive.
The New Hardware Found Window is
displayed.
The Next Hardware Found window is
displayed.
2
The Update Device Driver Wizard is
displayed. Click the Next button.
3
Click the Finish button.
INSTALLING DV CAPTURE DRIVERS (cont.)
®
®
95 VERSION 4.00.950B OR LATER
95 version. Double-click the system icon in the