Capturing Video; Capturing Video In Real Time - JVC Blank Media LYT1015 Instructions Manual

10
EN

Capturing video in real time

When a camcorder is connected to the PC with a USB cable, the video from the camcorder can be recorded
on the PC's hard drive instead of on tape or in a memory card (real-time capture).
1
Connect the camcorder to the PC with a USB cable.
Refer to "Connections (Windows
Installation and USB Connection Guide.
2
Set the camcorder to the memory card recording mode.
The camcorder is now on.
[Web CAMERA] appears on the camcorder's LCD monitor.
If [Web CAMERA] does not appear, install [USB Stream driver]. Refer to "Software Installation
®
(Windows )" (
and USB Connection Guide.
Camcorder operations are limited to the zoom switch, the focus button, and the still image button.
NOTE:
The procedure is different when reading or writing a memory card.
3
Select [Start] – [Programs] – [Pixela] –
[ImageMixer] – [PIXELA ImageMixer
Ver.1.0].
For Macintosh, double-click the
[ImageMixer] icon on the PC.
ImageMixer starts up.
4
Click the Input button.
The input mode screen appears.
®
)" (
pg. 5) and "Software Installation (Macintosh)" (
pg. 9) or "Connections (Macintosh)" (

CAPTURING VIDEO

pg. 13) in the Software
pg. 14) in the Software Installation
Input
CONTINUED ON NEXT PAGE