Panasonic Toughbook CF-28 Service Manual page 27

3) KEYBOARD TEST
Press 6 and Enter keys.
.or 4. PRESS KEY TEST.
Press 4 and Enter Keys.
.or 4. U.S.A..
Press 4 * and Enter keys.
*Note: Press appropriate number
accordingto the keyboard layout.
(Normal Message):
When an error message is displayed, refer to [5.2 Error Message].
.or 5. SCAN CODE RETURN TEST.
Press 5 and Enter keys.
Press any key. (Normal message) : KEY
When an error message is displayed, refer to [5.2 Error Massage].
4) POINTING DEVICE
Press 7 and Enter keys.
1. If the condition is normal, the cursor moves according to the movement of the mouse.
2. Pressing the button on the left or right side of the mouse causes display to change from O.. to ON.
KEYBOARD
1. TEST ALL DEVICES
2. TEST AUTOMATICALLY (
3. EXIT
4. PRESS KEY TEST
5. SCAN CODE RETURN TEST
SELECT MENU : _
PRESS KEY TEST
1. TEST ALL DEVICES
2. TEST AUTOMATICALLY (
3. EXIT
4. U.S.A.
5. U.K.
6. SWEDEN
7. JAPAN
8. GERMANY
9. .RANCE
10. ITALY
11. SPAIN
12. SWISS (Gr)
SELECT MENU : _
KEYBOARD TEST
Press each key for character replacement
If correct, press "Y" and "ENTER"
If not correct, press "N" and "ENTER"
Keyboard is OK
KEYBOARD RETURN CODE TEST
Key has been hit or broken (.10)
SCAN code : xx
Test done ! ! Press any key when ready._
Track Ball/Mouse Test
Left button O..
Right button O..
Is this correct ? (Y/N)
5 - 3
( DEVICES)
DEVICES)
( DEVICES)
DEVICES)
Press any key when ready._
Immediately after this message is displayed,press the key of
the test you would like toperform.
(The routine will terminate if no entry is pressed.)