Removing The Touch Pad Unit; Removing The Pcmcia Cn (Pc Card Slot) - Panasonic Toughbook CF-28 Service Manual

6.12. Removing the Touch Pad
Unit
Touch Pad Unit
Figure 21
Remove the four screws <M> that secure the touch pad
unit.
Screw <M> : DFHE5054YA
Screw tightening torque 0.49 ± 0.05 N·m (5.0 ± 0.5 kgf·cm)
6.13. Removing the PCMCIA CN
(PC Card Slot)
PCMCIA CN
(PC Card Slot)
Figure 22
Remove the four screws <N>, which connect the
PCMCIA unit to the main PCB.
Screw <N> : DFHE5025XA
Screw tightening torque 0.19 ± 0.02 N·m (2.0 ± 0.2 kgf·cm)
<M>
<N>
6 - 5
6.14. Removing RTC Battery
Figure 23
1. Remove the connector CN4, which connects RTC
battery to the main PCB.
2. Carefully peel off the adhesive tape, which adheres to
the hinge.
CAUTION: Ensure that the cushion, which secures the
battery, is not damaged.
RTC Battery
CN4