Flash Mode
The Flash is used to illuminate a subject in low light or for fill-in lighting to achieve better
illumination of a subject with pronounced shadows.
It can be adjusted in
1. Press the Flash Button
flash.
2
2. Press the
button to enter the Flash
menu.
3. Press the
/
the following 6 modes:
mode, please follow the steps below to configure the settings:
to pop up the
1
Force Off
button to select
•
Force Off
Flash is turned off.
•
Flash Auto
Camera flash goes off automatically
based on existing light conditions.
•
Fill Flash
The flash will engage with each shot
even if there is enough available
light to take the photo without flash.
•
Slow Sync.
This allows for night scenery
photos that include people in the
foreground. (Suggest using tripod)
•
Slow Sync. + Red-Eye
Use this mode for slow synchro
shots with red-eye reduction.
•
Red-Eye Reduction
The camera emits a brief pre-flash
before the picture is taken to reduce
red-eye effects.
4. Press the
button to confirm the settings
and exit the option.
57