Table of Contents
Advertisement
V I I . D I S A S S E M B L Y A N D A S S E M B L Y
DISASSEMBLY
You can disassemble the Travel Scooter into five
pieces: the seat, the front section, the rear section,
the basket, and the battery pack. See figure 24.
No tools are required to disassemble or assemble
your Travel Scooter. Always disassemble or
assemble your Travel Scooter on a level, dry
surface with sufficient room for you to work and
move around—about 5 feet (1.5 meters) in all
directions. Remember that some Travel Scooter
components are heavy and you may need
assistance when lifting them.
WARNING! Do not lift weight
beyond your physical capability.
Ask
for
necessary while disassembling
or
assembling
Scooter.
1. Lock the tiller in the straight ahead position by pushing the tiller lock knob in and turning it clockwise
90°. See figure 25. The front wheel must face forward in order to lock the tiller.
2. Remove the seat by lifting it straight up and off of the Travel Scooter. If you encounter resistance when
removing the seat, disengage the seat rotation lever and swivel the seat back and forth while lifting up
on the seat.
3. Remove the battery pack from the Travel Scooter.
LOCKED
POSITION
Figure 25. Tiller Lock knob (Locked)
Frame Separation
1. Lower the tiller and tighten the tiller adjustment knob.
2. Lift up on the frame release lever until the frame hooks are no longer resting on the lower frame tube.
3. Slowly separate the two sections of the Travel Scooter. See figure 26.
Elite Traveller
assistance
when
your
Travel
www.pridemobility.com
BASKET
REAR SECTION
FRONT SECTION
Figure 24. Disassembled Travel Scooter
UNLOCKED
POSITION
Figure 25A. Tiller Lock Knob (Unlocked)
SEAT
BATTERY PACK
33
Advertisement
Table of Contents
