Seat Height Adjustment - Pride Mobility Colt Series Owner's Manual

V I . C O M F O R T A D J U S T M E N T S

SEAT HEIGHT ADJUSTMENT

The seat can be repositioned to several different
heights. See figure 19.
1. Remove the seat and/or shroud from your
scooter. See VII. "Disassembly and Assembly."
2. Remove the seat height adjustment bolt.
3. Raise or lower the upper seat post to the
desired seat height.
4. While holding the upper seat post at that
height, match up the locating holes in the upper
seat post with those of the lower seat post.
5. Insert the seat height adjustment bolt through
the locating holes of both the upper and lower
seat posts.
6. Reinstall the nut onto the seat height adjust-
ment bolt and tighten.
7. Reinstall the rear shroud and the seat.
Colt Series
NUT
LOWER
SEAT
POST
Figure 19. Seat Height Adjustment
www.pridemobility.com
UPPER SEAT
POST
LOCATING
HOLE
SEAT HEIGHT
ADJUSTMENT
BOLT
33