Reassembly
Insert the Key Flex Assy into the slot as indicated by the
pointer.
Attach this part of the Key Flex Assy to the Hinge Slider
Assy according to the guiding pins and holes.
Press to secure the attachment.
Careful when bending the flex over the edge, wrong
handling could cause cracks in components on flex
Attach the Key Flex Assy and verify that the two holes are
properly aligned with the pins on the Hinge Slider Assy.
1222-6716 Rev 3
©
Sony Ericsson Mobile Communications AB – Company Internal
Working instruction (mech)
86(96)