Table of Contents
Advertisement
nstallation
TRODUCTIO
NDLING ND
H
TOR GE
S
PPROV LS OF
A
OMPONENTS
C
n this chapter you will find information and instructions
needed to install the burner and system components.
andling
nspect the system, make sure the components are clean and
free of damage.
Use the appropriate support and handling equipment when
lifting the burner .
Protect all components on the system from weather, damage,
dirt and moisture.
Protect the system and its components from excessive
temperatures and humidity.
Storage
When storing the system for an extended period Eclipse
recommends placing it in a cool, clean, dry room.
Keep all the system components stored in their original
packaging as long as possible.
Limit controls and safety equipment
All limit controls and safety equipment must comply with all
applicable local codes and/or standards, which may include:
NFPA Standard 86
NFPA Standard 86C
UL
FM
CGA
EN 746-2
Electrical wiring
All electrical wiring must comply with all applicable local codes
and/or standards, which may include:
NFPA Standard 70
ANS -C11981
EN 746-2
clipse Winnox WX Series v1, Installation Guide No. 111, 8/26/05
9
Advertisement
Table of Contents
