Space Cooling Operation - Samsung Control Unit User Manual

SPaCE CooLING oPERaTIoN

In this mode, heating function will be activated as required by target water temperature.
Target water temperature is determined in 2 ways as described below.
• Change set value manually.
• Use mode of "Water Law" (Auto mode).
1. Press Power (Space mode) button to turn on the heat
pump unit.
The heat pump will be turned on in the mode you select.
• S pace water cooling devices: R adiator or Fan coil unit
• H eating and cooling mode can not be selected at
the same time.
• S pace cooling operation is not possible if the
installation is a heating only installation.
The heat pump has a built-in protection mechanism
CAUTION
to prevent the unit from being damaged when it is
started immediately after being plugged in or stopped, the heat pump will start up after 3
minutes.
2. Press the Mode (Space mode) button twice to select the space cooling mode.
The heat pump will run on cooling mode.
3. Press Up or Down button to set the desired temperature.
The temperature can be set between 5ºC and 25ºC.
The temperature is adjusted by 0.5ºC.
RC120MHXGA_IB_E_34412A(1).indd 17
(field supply)
Operating basic function _17
2012-02-08 오후 2:35:39