Hotpoint Aquarius WD420P Service Information page 10

Options
Option Buttons
On/Off
Progress Indicator Lights Start/Cancel
Variable Control(s) Programme Selector Dial
Options are selected by pressing the button and confirmed by illumination of the LED.
Drying High Heat
The default setting is LOW heat. By selecting this allows HIGH heat for tumble drying.
Reduced Creases
Changes wash action and slightly increases drum speed on cotton programmes and removes end
of wash spin with a reduced speed on final spin on synthetic programmes.
Available on programmes C, E, G and Rinse and Spin programmes
Rinse Hold
Clothes will be suspended in cold water at the end of the final rinse. To complete the programme,
press the button when the LED is flashing
This option is not available on programmes A, H, K, L and Spin only
Time Saver
Saves programme time by up to a third depending on programme selected and is achieved by
reducing wash run times.
This option is only available on programmes B, D, G and H.
Extra Rinse
Adds an extra rinse to the programme
This option is not available on programmes A, E, H, J, K, L or Spin only
Variable Wash Temperature Control - Selected by Rotary Knob
Enables a lower wash temperature and No Heat to be selected
Note; if the dial is left at the maximum temperature setting the programme will be washed at the
maximum temperature for the programme selected
Variable Tumble Drying Time - Selected by Rotary Knob
Enables the required drying time to be chosen.
Maximum 180 minutes plus 20 minutes Cool Tumble.
10