Installing The I/O Shield - Gigabyte GA-X99-Gaming G1 WIFI User Manual

1-8

Installing the I/O Shield

For how to turn on/off the I/O shield LED indicators, refer to the instructions on in Chapter 2, "BIOS
Setup," "Peripherals," or Chapter 5, "Unique Features," "APP Center\Ambient LED."
Step 1:
Install the included I/O shield into the chassis. (For actual installation,
please refer to the user guide for your chassis.)
Step 2:
Place the motherboard into the chassis, aligning the back panel
connectors with the installed I/O shield. Connect the power cable
from the I/O shield to the LED_CON1 connector on the motherboard.
- 23 - Hardware Installation