1-8
Installing the I/O Shield
For how to turn on/off the I/O shield LED indicators, refer to the instructions on in Chapter 2, "BIOS
Setup," "Peripherals," or Chapter 5, "Unique Features," "APP Center\Ambient LED."
Step 1:
Install the included I/O shield into the chassis. (For actual installation,
please refer to the user guide for your chassis.)
Step 2:
Place the motherboard into the chassis, aligning the back panel con-
nectors with the installed I/O shield. Connect the power cable from the
I/O shield to the LED_CON1 connector on the motherboard.
- 23 -
Hardware Installation