Network - Panasonic DMR-XW385 Operating Instructions Manual

Changing the unit's settings
Deep Colour Output
This setting for selecting whether to use Deep Colour
output when a TV that supports Deep Colour is
connected.
HDMI Audio Output
Select "Off" when connected to TV with HDMI cable,
and connected to amplifiers not compatible with HDMI
with a DIGITAL AUDIO OUT terminal.
Contents Type Flag
Depending on the playback content, the TV will output
adjusting to the optimal method when a TV that
supports Contents Type Flag is connected.
VIERA Link
Set to use "HDAVI Control" function when connected
with an HDMI cable to a device that supports "HDAVI
Control".
≥Select "Off" when you do not want to use "HDAVI
Control".
74
VQT3F56

Network

Setup
Network
Network Easy Settings
Network Settings
Network
∫ Network Easy Settings
Press [OK] to start Network Easy Settings. (
∫ Network Settings
Network
Network Settings
Network Settings
IP Address / DNS Settings
Proxy Server Settings
Internet Content Settings
Home Network ( DLNA ) Settings
Server ( DLNA ) Settings
IP Address / DNS Settings
Check the connection of the network or set the IP
address and DNS.
≥Press [OK] to show the respective setting.
≥ "Connection Speed Setting" is enabled only when "Connection
Speed Auto-configure" is turned "Off".
Proxy Server Settings
Check and set the connection to the Proxy server.
≥Press [OK] to show the respective setting.
Internet Content Settings
Network Settings
Internet Content Settings
Internet Content Settings
Lock
Automatic Volume Control
Lock
You can restrict using VIERA CAST.
≥Follow the on-screen instructions.
≥PIN is required to change. (
Automatic Volume Control
Volume that is different depending on the contents is
adjusted automatically to the standard volume while
using the VIERA CAST.
≥Depending on contents, this function will not work.
≥Select "Off" when the audio is warped.
19)
67)