Fiat Ulysse Owner's Handbook Manual page 78

• recirculation on: when button O
is pressed it is possible to select the
following travelling conditions: closed
recirculation (relative led on), air com-
ing from outside (led off) recirculation
open, or having the system automatic
control on (led off even if activated).
It is easier to reach the
wished air temperature
conditions with inside air
recirculation. Anyway, it is better
not to use this function in
rainy/cold days because inside
window misting may increase, es-
pecially if the compressor is off.
You are recommended
to use the inside air recir-
culation function in the
traffic jam (car lines inside or out-
side galleries) to prevent outside
polluted air from getting into the
vehicle. Anyway, do not use this
function when several people are
onboard, to prevent inside win-
dow misting.
• driver's and passenger's side
temperature alignment (MONO)
fig. 88 (for versions without ad-
ditional fans): this is possible by
pressing button D, so a single tem-
perature is reached inside the passen-
ger compartment.
• rear seat air capacity adjust-
ment (REAR) fig. 89 (for versions
without additional fans): this is pos-
sible by pressing button D, thus the
second row passengers can adjust air
capacity with the additional fan knobs
A-fig. 90. The rear fan symbol will be
viewed on the display C.
The additional fan effect depends on
the position of knobs A:
0 = additional fan with minimum ca-
pacity;
– = additional fan air capacity equal to
50% of the main fan current capacity;
AUTO = additional fan capacity
equal to the main fan capacity;
+ = additional fan air capacity equal to
70% of the main fan current capacity.
fig. 90
F0B0102b
77