Table of Contents
Advertisement
9) Use handle A-fig. 5 to loosen the
spare wheel bolt B.
10) Release support C to remove
the spare wheel and close the tailgate.
fig. 5
11) Remove the wheel cap A-fig. 6
(for versions with steel rims) or the
clipped wheel hub cap (for versions
with alloy rims) by means of tool B
supplied with the car and housed in
the jack container.
12) Loosen the bolts fastening the
wheel to be changed by approximate-
ly one turn. Use the specific supplied
tool A-fig. 7 to remove the antitheft
bolt.
F0B0120b
fig. 6
13) Turn the jack handle to open it
partially and position the jack near the
wheel to be changed.
14) Make sure that the groove A-
fig. 8 on the jack is well fitted on the
ribbing B on the side member.
F0B0121b
fig. 7
F0B0122b
157
Advertisement
Table of Contents
