JVC KD-SH9101 Instructions Manual page 68

The ANN (announcement) indicator either lights
up or flashes.
• If the ANN indicator lights up, Announcement
Standby Reception is activated.
If a service starts broadcasting a programme of
the selected announcement type, this unit
automatically tunes in to the service.
• If the ANN indicator flashes, Announcement
Standby Reception is not yet activated since
the service being received does not provide
the signals used for Announcement Standby
Reception.
To activate Announcement Standby Reception,
you need to tune in to another service
providing these signals. Press ¢
4 to search for such a service.
When a service providing these signals is
tuned in, the ANN indicator stops flashing and
remains lit. Now Announcement Standby
Reception is activated.
Note:
After turning on Announcement Standby Reception,
you can change the source without canceling
Announcement Standby Reception. In this case, the
ANN indicator stops flashing if it was. If a service
starts broadcasting the selected announcement type,
this unit automatically changes the source and tunes
in to the service.
68
How Announcement Standby Reception
works:
If a service of the selected Announcement type
starts broadcasting while the Announcement
Standby Reception is activated, selected
announcement type appears and the unit tunes
into the service.
Announcement type
Travel:
or
Warning:
News:
Weather:
Event:
Special:
Rad Inf:
Sports:
Finance:
Programmes about travel
destinations, package tours, and
travel ideas and opportunities
Warnings about earthquakes,
tsunami, etc.
News
Weather information
Information about events, concerts,
etc.
Special programmes expanding
on current news or affairs
Radio information
Sport events
Reports on commerce, trading,
the Stock Market, etc.