White Ratio (Balance) Adjustment - Samsung LN26C350D1D Service Manual

Tft-lcd tv
Hide thumbs Also See for LN26C350D1D:
Table of Contents

Advertisement

4. Troubleshooting

4-5. White Ratio (Balance) Adjustment

1.
You can adjust the white ratio in factory mode (1:Calibration, 3:White-Balance).
2.
Since the adjustment value and the data value vary depending on the input source, you have to
adjust these in CVBS, Component 1 and HDMI 1 modes.
3.
The optimal values for each mode are configured by default. (Refer to Table 1, 2)
It varies with Panel's size and Specification.
- Equipment : CS-210
- Pattern: MIK K-7256 #92 "Flat W/B Pattern" as standard
- Use other equipment only after comparing the result with
that of the Master equipment.
- Set Aging time : 60min
- Calibration and Manual setting for WB adjustment.
HDMI : Calibration at #24 Chessboard Pattern
COMP: Calibration at #24 Chessboard Pattern
CVBS: Calibration at #24 Chessboard Pattern
- If finishing in HDMI mode, adjustment coordinate is almost same in AV/COMP mode.
- White Balance Manual Adjustment
4-34
Manual adjustment #92 pattern (720p)
Manual adjustment at #92 pattern (720p)
Manual adjustment at #92 pattern (NTSC)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ln32c350d1d

Table of Contents