Power Connector - Cal Amp LMU-4200 Hardware And Installation Manual

LMU-4200™ Hardware and Installation Guide

1.3.1 Power Connector

The LMU-4200™ uses a 4 pin Molex 43045-0402 connector as its power connection. The
pin out is as follows:
Pin Signal Name
1 VIN
2 GND
3 INPUT 0
4 ADC1
CalAmp offers a fused, 4-wire, 8 foot harness that mates to this connector (Part Number
5C888)
V1.0.9
Copyright ©CalAmp DataCom Inc 2010
Description
Power
Ground
Input 0 / Ignition Sense –
Digital Input
Analog to Digital Input 1
Figure 2 - LMU-4200™ Header (looking into LMU)
Input or Output
Power / Input
Ground
Input
Input
CalAmp Proprietary & Confidential
- 5 -
November 13, 2010