Cal Amp LMU-4200 Hardware And Installation Manual page 29

LMU-4200™ Hardware and Installation Guide
o <mobile ID type>:
This will be the type of Mobile ID in use by the LMU. The available types are,
Off, ESN, IMEI, IMSI, USER, MIN and IP ADDRESS.
 INB:
o <inbound IP address>:
This is the current IP address in use by the LMU. This value should match the
IP address of your LM Direct server.
o <inbound port>:
This is the current UDP port the LMU will use to deliver its LM Direct data.
This value should match UDP port you are using on your LM Direct server. It
is typically 20500.
o <Inbound Protocol (LMD/LMX)>:
This is the current UDP/IP messaging protocol in use by the LMU. In general
it should be LMD.
Example CDMA Response:
APP:082 8.3d
COM:-81 D A 10.73.72.105
GPS:3D-INVLD 0
INP:11100111 13.6V
MID:4141000100 ESN
INB:207.7.101.227:20500 LMD
Example GSM Response
APP:081 8.3d
COM:0
GPS:No Time Sync
INP:11100111 13.7V
MID:4141000100 ESN
INB:207.7.101.227:20500 LMD
V1.0.9
Copyright ©CalAmp DataCom Inc 2010 CalAmp Proprietary & Confidential
- 27 -
November 13, 2010