Connection/Preparation; Connecting The Antenna And The Mains Cable; Inserting Batteries In The Remote Control - Grundig LENARO 27 User Manual

TV R
AUDIO
V L R ANT IN L R
AV OUT COMPONENT

CONNECTION/PREPARATION

Connecting the antenna and the mains cable

AV 2
AV 1
AUDIO
V L R ANT IN L R Y Pb Pr
AV OUT COMPONENT VIDEO INPUT
1
Plug the antenna cable of the rooftop antenna into the »ANT IN« anten-
1
na socket on the television.
2 Plug the mains cable supplied into the »AC IN« mains socket of the tele-
vision.
Plug the mains cable into the wall socket.
3
Note:
Only plug the device into the mains socket after you have
connected the external devices and the antenna.

Inserting batteries in the remote control

1 Open the battery compartment by removing the lid.
Insert the batteries (Mignon type, for example UM-3 or
2
AA, 2x1,5V). Observe the polarity (marked on the base
of the battery compartment).
3 Close the battery compartment.
Note:
If the television no longer reacts properly to remote
control commands, the batteries may be flat. Be sure to
remove used batteries.
The manufacturer accepts no liability for damage re-
sulting from used batteries.
Environmental note
Batteries, including those which contain no heavy metal,
may not be disposed of with household waste. Please
dispose of used batteries in an environmentally sound
manner. Find out about the legal regulations which apply
in your area.
PC-DVI
DVI-D HDMI PC-IN
AUDIO-IN
2
AC IN
__________
3
5