Picture Settings; Audio Settings - Grundig LENARO 27 User Manual

Picture
Brightness 39
Contrast
Colour
Sharpness
Hue
Noise reduction Sharp
Picture smart User
To Page 2
Select
OK
and edit
Sound
Volume 0
Balance
Sound type Stereo
Effect Normal
AVL On
Equalizer
Headphones
Select
and edit
12
SETTINGS

Picture settings

Press »
1
– The »MAIN MENU« appears.
2 Select »Picture« with »P+« or »P-« and confirm with »OK«.
– The »Picture« menu appears.
Select »Default settings« with »P+« or »P-« and the setting
3
»User« with » « or » «.
Select »Brightness«, »Contrast«, »Colour«, »Sharpness« or
4
Back
Exit
»Noise reduction« with »P+« or »P-« and press »OK« to con-
firm.
Note:
The setting »Hue« only applies to NTSC programmes (e.g. for
playback of American television programmes on the video
recorder).
Press » « or » « to select the level, and then press »OK« to
5
confirm.
Press »
6

Audio settings

1 Press »
– The »MAIN MENU« appears.
Select »Sound« with »P+« or »P-« and confirm with »OK«.
2
– The »Sound« menu appears.
Volume
Select »Volume« with »P+« or »P-« and adjust the setting with
1
Back
» « or » «.
Exit
Balance
Select »Balance« with »P+« or »P-« and adjust the setting with
1
» « or » «.
Stereo / two channel, mono
If the device receives two channel programmes, e.g. a film with the
original sound on sound channel B (display: »Dual B «) and the
dubbed version on sound channel A (display: »Dual A«), you can
select the sound channel you desire.
If the device receives stereo or Nicam programmes, it switches
automatically to stereo sound (display: »Stereo«).
You can switch the sound to »Mono« if the stereo reception
quality is poor.
Select »Sound type« with »P+« or »P-« and adjust the setting
1
with » « or » «.
______________________________________________
i
« to open the »MAIN MENU«.
i
« to finish the settings.
i
« to open the »MAIN MENU«.