Setting Up The Picture - Toshiba 20VL64 series Owner's Manual

20VL64-en.book Page 17 Thursday, February 1, 2007 5:06 PM
Selecting the picture mode
You can select your desired picture type from four
picture modes: 1, 2, 3, or M.
To select the picture mode:
• Using the remote control
Press on the remote control repeatedly until
a preferred mode is selected.
Picture
Mode
MENU
• Using the on-screen display menu
1. Press MENU, and then press
Picture menu appears.
2. Press to highlight Picture Mode and press
/ to select a preferred mode.
Picture
Picture Mode
Contrast
Brightness
Colour
Sharpness
Tint
Picture Advanced Setting >
MENU OK EXIT
Adjusting the picture quality
If you are not satisfied with the preset picture
quality, you can additionally adjust the picture
contrast, brightness, colour, and sharpness levels
based on a selected picture mode.
To adjust the settings:
1. In the Picture menu, press
item you want to adjust is highlighted.
2. Press / to adjust the level.
3. To continue adjusting the other items, repeat
step 1-2.
Selection
Contrast lower
Brightness darker
Colour paler
Sharpness softer
Tint reddish
The changes you make in the picture settings will
be stored to the .
M mode

Setting up the picture

TINT: When an NTSC video signal is connected
to EXT1, EXT2, EXT3 or EXT3-S, you can adjust
the colour tint setting. If you do not connect this
type of video, then the TINT option will not be
available on the OSD menu.
There are more advanced settings open for
adjustment: Black Stretch, Noise Reduction,
Colour Temperature. To adjust the advanced
settings:
4. In the Picture menu, press
P EXIT
5. Press
/ until the
6. Press
1
53
32
32
+0
+0
7.
Black Stretch (increases the
strength of dark areas of the
/ until the
picture)
Noise Reduction (adjusts the
noise reduction strength)
Colour Temperature (selects a
preferred color temp.)
Pressing
Note:
higher
When the selected input signal is PC, the
lighter
following functions will not be available: Colour,
deeper
Sharpness, Tint, Black Stretch, and Noise
Reduction.
sharper
greenish
To reset the picture settings:
In the Picture > Picture Advanced Setting menu,
press
OK to return all of the picture settings to the
default values of
ENGLISH-17-
Picture Advanced Setting is highlighted.
or OK to display the Picture
Advanced Setting page.
/ until the item you want to
adjust is highlighted and press
adjust the level.
Picture
Picture Mode 1
Contrast 53
Brightness 32
Picture Advanced Setting
Colour
32
Black Stretch
Sharpness
+0
Noise Reduction
+0
Tint
Colour Temperature
Picture Advanced Setting
Picture Reset
MENU OK EXIT
MENU/ENTER EXIT
To continue adjusting the other items, repeat
step 6.
Item
to highlight Picture Reset and press
1 mode.
/ until
/ to
Off
Off
Cool
Options
Low, Middle,
High, Off
Low, Middle,
High, Off
Normal,
Warm, Cool
or