Editing Programs, Setting Up The Sound - Toshiba 20VL64 series Owner's Manual

20VL64-en.book Page 15 Thursday, February 1, 2007 5:06 PM

Editing programs, Setting up the sound

Editing programs
To set the TV to your personal needs, you can
name the programs, swap channel numbers
(change channels sequence), skip the programs
that you don't need by using the functions
provided in the Programme Edit menu.
To assign an up to 5-character label to channels:
1. Press MENU, and then press
the Channel menu appears.
2. Highlight Programme Edit and press
OK to display the Programme Edit page.
Programme Edit
Position
Name
Position Swap
Skip
MENU OK EXIT
3. Highlight Position and press
numeric button to select the channel you
want to edit.
4. Press to highlight Name and press
OK. An asterisk will display in the first
place.
5. Press / to select a desired character
from among A-Z, 0-9, and symbols like . + -
, etc. for each. You can move between
characters by pressing
6. When complete, press OK or
left hand side until the * disappears.
To swap channels:
You can sort out the similar types of channels
from others or re-arrange the channel sequence
to a preferred order by swapping channels.
7. Highlight Position and press /
numeric button to select the channel you
want to swap.
8. Press to highlight Position Swap and
enter another channel number that you
would like to swap.
9. Press OK. The channel number will change
immediately.
To skip unwanted channels:
10. Highlight Position and press
numeric button to select the channel you
want to skip.
11. Press
to select On. The selected channel will be
skipped when you press P
If you want to restore the skipped channel, repeat
step 10-11
Setting up the sound
You can adjust the sound volume of your TV by
/ until
@
using
can control the other sound settings by entering
or
the Audio menu.
Selecting a sound mode
There are five sound modes available. To select a
01
preset sound mode, press
------
control repeatedly until the preferred mode is
--
Off
selected.
Mode
/ or the
Flat
Hall
or
Theatre
News
Memory
/ .
Adjusting the sound quality
to the far
You can change the quality of your TV's sound by
adjusting the balance, treble, and bass.
To adjust the sound balance:
1. Press
or the
/ or the
ENGLISH-15-
to highlight Skip and press
/P
and select Off in step 11.
6
/ on your remote control or TV. You
on the remote
Sound Quality
flat sound (factory setting)
a concert hall filled with a rich warm
sound (factory setting)
a movie theatre filled with a
dynamic sound (factory setting)
news/dialogue (factory setting)
your personal preference
to highlight Balance and press
to change the setting.
Audio
Sound Mode Flat
Balance
Sound Type L+R
AVL Off
Speaker Out On
Audio Advanced Setting >
Audio Reset
MENU OK EXIT
/
.
/
0