Cd Operations; Playing A Cd - JVC KD-S20 Instructions Manual

CD OPERATIONS

Playing a CD

Insert a CD into the loading slot.
Note on One-Touch Operation:
When a CD is already in the loading slot, pressing
CD turns on the unit and starts playback
automatically.
The CD–in indicator flashes.
The CD–in indicator light up.
Total playing time of
the inserted disc
Elapsed playing time
All tracks will be played repeatedly until you stop
playback.
12
The unit turns on, draws
the CD and starts
playback automatically.
Total track number
of the inserted disc
Current track
number
Note:
When a CD is inserted upside down, "EJECT" and
the CD–in indicator flash on the display and the CD
automatically ejects.
To stop play and eject the CD
Press 0.
CD play stops and the CD automatically ejects
from the loading slot. The source changes to the
tuner (you will hear the last received station.)
• If you change the source, CD play also stops
(without ejecting the CD).
Next time you select "CD" as the source, CD
play starts from where playback has been
stopped previously.
Notes:
• If the ejected CD is not removed for about
15 seconds, the CD is automatically inserted again
into the loading slot to protect it from dust.
(CD play will not start this time.)
• You can eject the CD even when the unit is turned
off.
About mistracking:
Mistracking may result from driving on extremely
rough roads. This does not damage the unit and
the CD, but will be annoying.
We recommend that you stop CD play while
driving on such rough roads.