JVC GET0642-001A Instruction Manual

JVC GET0642-001A Instruction Manual

Jvc cd receiver instructions manual
Table of Contents

Advertisement

Available languages

Available languages

Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Still having trouble??
USA ONLY
Call 1-800-252-5722
http://www.jvc.com
We can help you!
EN, SP
© 2009 Victor Company of Japan, Limited
CD RECEIVER
RECEPTOR CON CD
For canceling the display demonstration, see page 4.
Para cancelar la demostración en pantalla, consulte la página 4.
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
0709DTSMDTJEIN
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
KD-S26
KD-S26
For customer Use:
Enter below the Model
No. and Serial No. which
are located on the top or
bottom of the cabinet. Retain
this information for future
reference.
Model No.
Serial No.
GET0642-001A
[J]

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for JVC GET0642-001A

  • Page 1 0709DTSMDTJEIN KD-S26 KD-S26 For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain INSTRUCTIONS this information for future reference. MANUAL DE INSTRUCCIONES Model No. Serial No. GET0642-001A...
  • Page 2 – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not approved by JVC could void the user’s authority to operate the equipment. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
  • Page 3: Table Of Contents

    How to reset your unit • Your preset adjustments will also be erased (except the registered Bluetooth device, see page 10). How to forcibly eject a disc • Be careful not to drop the disc when it ejects. • If this does not work, reset your unit. Attaching the control panel Detaching the control panel Caution on volume setting:...
  • Page 4: Canceling The Display Demonstration

    Canceling the display demonstration Turn on the power. Setting the clock Turn on the power. Select “CLOCK.” Select “CLOCK SET.” Adjust the hour. Adjust the minute. Finish the procedure. Select “DEMO OFF.” (Initial setting) Finish the procedure. (Initial setting)
  • Page 5: Operations

    Basic operations Using the control panel • FM/AM: Select preset station. • HD RADIO: Select channel. • SIRIUS/XM: Select category. • CD/CD-CH: Select folder. • IPOD: Enter the main menu/Pause playback/ Confirm selection. • BT-PHONE/BT-AUDIO: Enter/go back to previous Bluetooth menu. •...
  • Page 6: Using The Remote Controller (Rm-Rk50)

    Display window Bluetooth indicator Tr (track) indicator Status of Bluetooth device (Device number, [P: 1 – 5]; signal strength, : 0 – 3]*; battery reminder, [ : 0 – 3]*) * As the number increases, the signal/battery power becomes stronger. Source display / Track number / Folder number / Time countdown indicator Playback source indicators—CH (CD changer), DISC...
  • Page 7 • Turns the power on if pressed briefly or attenuates the sound when the power is on. • Turns the power off if pressed and held. • Changes the tuner/HD Radio preset stations. • Changes the folder of the MP3/WMA. •...
  • Page 8: Listening To The Radio

    Listening to the radio Select “FM” or “AM.” Search for a station to listen—Auto Search. Manual Search: Hold either one of the buttons until “M” flashes on the display, then press it repeatedly. • When receiving an FM stereo broadcast with sufficient signal strength, “ST” When an FM stereo broadcast is hard to receive •...
  • Page 9: Disc Operations

    Manual presetting (FM/AM) You can preset up to 18 stations for FM and 6 stations for AM. Ex.: Storing FM station of 92.50 MHz into preset number “04.” Select preset number “04.” Disc operations Stop playing and ejecting the disc •...
  • Page 10: Using The Bluetooth ® Devices

    Pressing (or holding) the following buttons allows you to... MP3/WMA: Select folder [Press] Select track [Hold] Reverse/fast-forward track Selecting the playback modes You can use only one of the following playback modes at a time. [Turn] [Press] Ô REPEAT RANDOM [Turn] [Press] REPEAT...
  • Page 11 Registering using “OPEN” Preparation: Operate the device to turn on its Bluetooth function. Select “BT-PHONE” or “BT-AUDIO.” Select “NEW DEVICE.” Select “OPEN.” Enter a PIN (Personal Identification Number) code to the unit. • You can enter any number you like (1-digit to 16-digit number).
  • Page 12: Using The Bluetooth Cellular Phone

    When a text message comes in... If the cellular phone is compatible with text message (notified through JVC Bluetooth adapter) and “MSG INFO” (message info) is set to “AUTO” (see page 22), the unit rings to inform you of the message arrival.
  • Page 13: Using The Bluetooth Audio Player

    Enter setting menu (Device list) • Refer also to page 12 for connecting/disconnecting/ deleting a registered device. Bluetooth Information: If you wish to receive more information about Bluetooth, visit the following JVC web site: <http://www.jvc.co.jp/english/car/> (English website only) EXTERNAL DEVICES...
  • Page 14: Listening To The Hd Radio ™ Broadcast

    Listening to the HD Radio ™ Broadcast Before operating, connect HD Radio tuner box, KT-HD300 (separately purchased) to the CD changer jack on the rear of the unit. What is HD Radio Technology? HD Radio Technology can deliver high-quality digital sound—AM digital will have FM-like quality (in stereo) and FM digital will have CD-like quality—with static- free and clear reception.
  • Page 15: Listening To The Cd Changer

    Listening to the CD changer It is recommended to use a JVC MP3-compatible CD changer (separately purchased) with your unit. You can connect a CD changer to the CD changer jack on the rear of the unit. • You can only play conventional CDs (including CD Text) and MP3 discs.
  • Page 16: Listening To The Satellite Radio

    Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit. • JVC SIRIUS satellite radio System, SC-C1 and KS-SRA100, PnP, SC-VDOC1 and KS-SRA100, for listening to the SIRIUS Satellite radio.
  • Page 17: Storing Channels In Memory

    Select “SIRIUS” or “XM.” Select a category. SIRIUS: If you select “ALL,” you can tune in to all the channels of all categories. Select a channel to listen. • Holding the button changes the channels rapidly. • While searching, invalid and unsubscribed channels are skipped. XM: If you do not select a channel within 15 seconds, category selected in step 2 Storing channels in memory You can preset up to 18 channels for both SIRIUS and...
  • Page 18: Listening To The Ipod

    Listening to the iPod Before operating, connect the Interface adapter for iPod, KS-PD100 (separately purchased) to the CD changer jack on the rear of the unit. Preparation: Make sure “CH / IPOD” is selected in the “SRC SELECT” Select “IPOD.” Select a song.
  • Page 19: Listening To The Other External Components

    Change the display information Folder name Track name Current track number with the elapsed playing time with the clock time (back to the beginning) Listening to the other external components You can connect an external component to: • CD changer jack on the rear of this unit using the following adapters: –...
  • Page 20: Selecting A Preset Sound Mode

    Selecting a preset sound mode You can select a preset sound mode suitable to the music genre. • See also page 23 (“EQ”). Preset value setting for each sound mode Sound BASS mode Freq. Level USER 60 Hz ROCK 100 Hz CLASSIC 80 Hz POPS...
  • Page 21: Title Assignment

    Select a tone. [Turn] [Press] Adjust the sound elements of the selected tone. [Turn] [Press] Adjust the frequency. Adjust the level. Adjust the Q-slope. Range/selectable items Sound elements BASS MIDDLE TREBLE Frequency 60 Hz 500 Hz 80 Hz 1.0 kHz 100 Hz 1.5 kHz 120 Hz...
  • Page 22: Bluetooth Settings

    Appears only when a Bluetooth phone is connected. Appears only when a Bluetooth phone is connected and it is compatible with text message (notified through JVC Bluetooth adapter). Bluetooth Audio: Shows only “Version.” Change the setting accordingly. Setting menu (...
  • Page 23: Menu Operations

    Menu operations Category Menu items Selectable settings, [reference page] DEMO • DEMO ON Display demonstration • DEMO OFF CLOCK DISP * • CLOCK ON Clock display • CLOCK OFF CLOCK SET : Adjust the hour, then the minute, [4]. Clock setting [Initial: 1:00] CLOCK ADJ * •...
  • Page 24 Category Menu items Selectable settings, [reference page] TAG DISPLAY • TAG ON Tag display • TAG OFF AREA • AREA US Tuner channel interval • AREA EU • AREA SA MONO * • MONO ON Monaural mode • MONO OFF SID * : Your SIRIUS identification number scrolls on the display 5 seconds after “SID”...
  • Page 25 Category Menu items Selectable settings, [reference page] FADER* R06 – F06 Fader BALANCE * L06 – R06 Balance LOUD • LOUD OFF Loudness • LOUD ON VOL ADJUST VOL ADJ –05 — Volume adjust VOL ADJ +05 [Initial: VOL ADJ 00] L/O MODE •...
  • Page 26: Color Settings

    SETTINGS : Disable “AM” in source selection. : Enable “AM” in source selection, [5]. : To use a JVC CD changer, [15], or an Apple iPod, [18]. : To connect portable audio player to the CD changer jack, [19]. : Disable “AUX IN” in source selection.
  • Page 27: References

    More about this unit Basic operations Turning on the power • By pressing SRC button on the unit, you can also turn on the power. If the source is ready, playback also starts. Turning off the power • If you turn off the power while listening to a track, playback will start from where it had been stopped previously next time you turn on the power.
  • Page 28: Bluetooth Operations

    • CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than that of regular CDs. • Do not use the following CD-Rs or CD-RWs: – Discs with stickers, labels, or a protective seal stuck to the surface. –...
  • Page 29: Satellite Radio

    Notice: When operating an iPod, some operations may not be performed correctly or as intended. In this case, visit the following JVC web site: <http://www.jvc. co.jp/english/car/> (English website only) Title assignment • If you try to assign titles to more than 30 station frequencies, “NAME FULL”...
  • Page 30: Troubleshooting

    Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms • Sound cannot be heard from the speakers. • The unit does not work at all. • “AUX” cannot be selected. •...
  • Page 31 Symptoms • Noise is generated. • A longer readout time is required (“READING” keeps flashing on the display). • Tracks do not play back in the order you have intended them to play. • The elapsed playing time is not correct. •...
  • Page 32 Symptoms • The sound is interrupted or skipped during playback of a Bluetooth audio device. • The connected audio device cannot be controlled. • Sound quality changes when receiving HD Radio stations. • No sound can be heard. • “RESET 8” appears on the display. •...
  • Page 33 Symptoms • “CALL 1-888-539-SIRIUS TO SUBSCRIBE” scrolls on the display while listening to the SIRIUS Satellite radio. • No sound can be heard. “UPDATING” appears on the display. • “NO SIGNAL” appears on the display. • “NO ANTENNA” or “ANTENNA”appears on the display.
  • Page 34 • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Victor Company of Japan, Limited (JVC) is under license. Other trademarks and trade names are those of their respective owners.
  • Page 35: Maintenance

    Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. Connectors Moisture condensation Moisture may condense on the lens inside the unit in the following cases: •...
  • Page 36: Specifications

    Specifications AUDIO AMPLIFIER SECTION Power Output: 20 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N Signal-to-Noise Ratio: 80 dBA (reference: 1 W into 4 Ω) Load Impedance: Tone Control Range: Frequency Response: Line-Out Level/Impedance: Subwoofer-Out Level/Impedance: Output Impedance: Other Terminal: TUNER SECTION...
  • Page 37 CD PLAYER SECTION Type: Signal Detection System: Number of Channels: Frequency Response: Dynamic Range: Signal-to-Noise Ratio: Wow and Flutter: MP3 Decoding Format: (MPEG1/2 Audio Layer 3) WMA (Windows Media® Audio) Decoding Format: GENERAL Power Requirement: Grounding System: Allowable Operating Temperature: Dimensions (W ×...
  • Page 38 – Consulte a su distribuidor o a un técnico experto en radio/televisión. Precaución: Los cambios o modificaciones no aprobados por JVC pueden anular la autoridad del usuario para operar el equipo. IMPORTANTE PARA PRODUCTOS LÁSER 1. PRODUCTO LÁSER CLASE 1 2.
  • Page 39: Cómo Reposicionar Su Unidad

    Cómo reposicionar su unidad • También se borrarán los ajustes preestablecidos realizados por usted (excepto el dispositivo Bluetooth registrado, véase página 10). Cómo expulsar el disco por la fuerza • Tenga cuidado de no dejar caer el disco al ser expulsado.
  • Page 40: Cancelación De Las Demostraciones En Pantalla

    Cancelación de las demostraciones en pantalla Encienda la unidad. (Configuración inicial) Puesta en hora del reloj Encienda la unidad. (Configuración inicial) Seleccione “CLOCK.” Seleccione “CLOCK SET.” Ajuste la hora. Ajuste los minutos. Finalice el procedimiento. Seleccione “DEMO OFF.” Finalice el procedimiento.
  • Page 41: Operaciones

    Operaciones básicas Uso del panel de control • FM/AM: Selecciona la emisora preajustada. • HD RADIO: Seleccionar un capítulo. • SIRIUS/XM: Seleccione una categoría. • CD/CD-CH: Seleccionar la carpeta. • IPOD: Ingresa al menú principal/pausa la reproducción/confirma la selección. • BT-PHONE/BT-AUDIO: Ingresa/vuelve al menú Bluetooth anterior.
  • Page 42: Uso Del Control Remoto (Rm-Rk50)

    Ventanilla de visualización Indicador Bluetooth Indicador Tr (pista) Estado del dispositivo Bluetooth (Número de dispositivo, [P: 1 – 5]; intensidad de la señal, [ : 0 – 3]*; recordatorio de batería, [ : 0 – 3]*) * A medida que el número aumenta, la señal / energía de la pila se hace más potente.
  • Page 43 • La unidad se enciende al pulsarlo brevemente o el sonido se atenúa cuando está encendida. • La unidad se apaga si lo pulsa y mantiene pulsado. • Cambia las emisoras preajustadas del sintonizador/HD Radio. • Cambia la carpeta de MP3/WMA. •...
  • Page 44: Para Escuchar La Radio

    Para escuchar la radio Seleccione “FM” o “AM”. Efectúa la búsqueda de una emisora—Búsqueda automática. Búsqueda manual: Mantenga pulsado uno de los botones hasta que “M” parpadee en la pantalla y, a continuación, púlselo repetidamente. • Cuando se recibe una radiodifusión en FM estéreo con una seńal Cuando una radiodifusión en FM estéreo sea difícil de recibir •...
  • Page 45: Operaciones De Los Discos

    Preajuste manual (FM/AM) Es posible preajustar hasta 18 emisoras para FM y 6 emisoras para AM. Ej.: Almacenando la emisora FM de 92,50 MHz en el número de preajuste “04”. Seleccione el número de preajuste “04”. Operaciones de los discos Detención de la reproducción y expulsión del disco •...
  • Page 46: Uso De Dispositivos Bluetooth

    Pulsando (o sosteniendo) los siguientes botones usted podrá... MP3/WMA: Seleccionar la carpeta [Pulse] Seleccionar la pista [Sostener] Retroceso/avance rápido de pista Cómo seleccionar los modos de reproducción Podrá utilizar solamente uno de los siguientes modos de reproducción a la vez. [Gire] [Pulse] Ô...
  • Page 47 Registrar usando “OPEN” Preparativos: Opere el dispositivo para activar su función Bluetooth. Seleccione “BT-PHONE” o “BT-AUDIO”. Seleccione “NEW DEVICE”. Seleccione “OPEN”. Ingrese un código PIN (Número de identificación personal) en la unidad. • Puede introducir cualquier número que desee (número de 1 a 16 dígitos). [Inicial: 0000] * Algunos dispositivos tienen su propio código PIN: Introduzca el código PIN específico en la unidad.
  • Page 48: Usar El Teléfono Celular Bluetooth

    Si el teléfono celular es compatible con mensajes de texto (que se notifica a través del adaptador Bluetooth JVC), y “MSG INFO” (información sobre mensaje) está ajustado a “AUTO” (consulte la página 22), la unidad emite un pitido audible para avisarle la llegada de un mensaje.
  • Page 49: Uso Del Reproductor De Audio Bluetooth

    Ingrese el menú de ajustes (Lista de dispositivos) • Para conectar/desconectar/borrar un dispositivo registrado, consulte también la página 12. Información Bluetooth: Si desea obtener más información sobre Bluetooth, visite el siguiente sitio web de JVC: <http://www.jvc.co.jp/english/car/> (Sitio web sólo en inglés) DISPOSITIVOS EXTERNOS...
  • Page 50: Para Escuchar La Transmisión De Hd Radio

    Para escuchar la transmisión de HD Radio ™ Antes de hacer funcionar, conecte el sintonizador HD Radio, KT-HD300 (de venta por separado) al jack del cambiador de CD en la parte posterior de la unidad. ¿Qué es la tecnología HD Radio? La tecnología HD Radio puede brindar sonido digital de alta calidad—las emisiones digital AM tendrán calidad similar a las FM (en estéreo) y las digital FM poseerán...
  • Page 51: Escuchando El Cambiador De Cd

    Escuchando el cambiador de CD Se recomienda usar, con esta unidad, un cambiador de CD compatible con MP3 JVC (vendido separadamente). Puede conectar un cambiador de CD al jack del cambiador de CD en la parte trasera de la unidad.
  • Page 52: Para Escuchar La Radio Satelital

    Antes de la operación, conecte cualquiera de las dos unidades siguientes (adquiridas separadamente) al jack del cambiador de CD de la parte trasera de esta unidad. • Sistema de radio satelital JVC SIRIUS, SC-C1 y KS-SRA100, PnP, SC-VDOC1 y KS-SRA100, para escuchar la radio satelital SIRIUS.
  • Page 53 Seleccione “SIRIUS” o “XM”. Seleccione una categoría. SIRIUS: Si selecciona “ALL”, puede sintonizar todos los canales de todas las categorías. Seleccione el canal de audición. • Al mantener pulsado el botón, los canales se cambian rápidamente. • Durante la búsqueda, se omiten los canales no válidos y aquellos a los que no está...
  • Page 54: Para Escuchar El Ipod

    Para escuchar el iPod Antes de hacer funcionar, conecte la interfaz adaptadora para iPod, KS-PD100 (de venta por separado) al jack del cambiador de CD en la parte posterior de la unidad. Preparativos: Asegúrese de que esté seleccionado “CH / IPOD” en el ajuste “SRC SELECT” consulte la página 26.
  • Page 55: Escuchando Otros Componentes Externos

    Cambia la información en pantalla Nombre de la carpeta Nombre de la pista transcurrido Número de la pista actual con la hora del reloj Escuchando otros componentes externos Podrá conectar un componente externo a: • Jack del cambiador de CD de la parte trasera de esta unidad utilizando los siguientes adaptadores: –...
  • Page 56: Selección De Un Modo De Sonido Preajustado

    Selección de un modo de sonido preajustado Podrá seleccionar un modo de sonido preajustado adecuado al género musical. • Consulte también la página 23 (“EQ”). Configuración del valor preajustado para cada modo de sonido Modo de BASS sonido Frec. Nivel USER 60 Hz ROCK...
  • Page 57: Asignación De Título

    Seleccione un tono. [Gire] [Pulse] Ajuste los elementos de sonido del tono seleccionado. [Gire] [Pulse] Ajuste la frecuencia. Ajuste el nivel. Ajuste la curva Q. Gama/Ítems seleccionables Elementos de sonido BASS MIDDLE TREBLE Frecuencia 60 Hz 500 Hz 80 Hz 1.0 kHz 100 Hz 1.5 kHz...
  • Page 58: Ajustes Bluetooth

    Bluetooth. Aparece solamente cuando se ha conectado un teléfono Bluetooth, y es compatible con mensajes de texto (se notifica a través del adaptador Bluetooth JVC). Bluetooth Audio: Sólo se muestra “Version”. Cambie el ajuste de conformidad. Menú de ajustes (...
  • Page 59: Operaciones De Los Menús

    Operaciones de los menús Categoría Opciones del Configuraciones seleccionables, [página de referencia] menú DEMO • DEMO ON Demostración en pantalla • DEMO OFF CLOCK DISP * • CLOCK ON Indicación del reloj • CLOCK OFF CLOCK SET : Ajuste la hora, y a continuación, los minutos, [4]. Ajuste del reloj [Inicial: 1:00] CLOCK ADJ *...
  • Page 60 Categoría Opciones del Configuraciones seleccionables, [página de referencia] menú TAG DISPLAY • TAG ON Visualización de etiqueta • TAG OFF AREA • AREA US Intervalo entre canales del • AREA EU sintonizador • AREA SA MONO * • MONO ON Modo monoaural •...
  • Page 61 Categoría Opciones del Configuraciones seleccionables, [página de referencia] menú FADER* R06 – F06 Atenuador BALANCE * L06 – R06 Balance LOUD • LOUD OFF Sonoridad • LOUD ON VOL ADJUST VOL ADJ –05 — Ajuste de VOL ADJ +05 volumen [Inicial: VOL ADJ 00] L/O MODE •...
  • Page 62: Ajustes De Color

    : Se desactiva “AM” en la selección de fuente. : Se activa “AM” en la selección de fuente, [5]. : Para usar un cambiador de CD JVC, [15] o un iPod Apple [18]. : Para conectar un reproductor de audio portátil al jack del cambiador de CD, [19].
  • Page 63: Referencias

    Más sobre este receptor Operaciones básicas Conexión de la alimentación • También es posible conectar la alimentación pulsando el botón SRC en la unidad. Si está preparada la fuente, también se iniciará la reproducción. Apagado de la unidad • Si apaga la unidad mientras está escuchando alguna pista, la próxima vez que la encienda, la reproducción comenzará...
  • Page 64 • Los CD-RWs pueden requerir un tiempo de lectura mayor debido a que la reflectancia de los CD-RWs es menor que la de los CDs regulares. • No utilice los CD-Rs o CD-RWs siguientes: – Discos con pegatinas, etiquetas o un sello de protección adheridos a la superficie.
  • Page 65 Atención: Cuando opera un iPod, algunas operaciones pueden no funcionar correctamente o como se desea. En tal caso, visite el siguiente sitio web de JVC: <http:// www.jvc.co.jp/english/car/> (Sitio web sólo en inglés) Asignación de título • Cuando intente asignar títulos a más de 30 frecuencias de emisoras, aparecerá...
  • Page 66: Localización De Averías

    Localización de averías Lo que aparenta ser una avería podría resolverse fácilmente. Verifique los siguientes puntos antes de llamar al centro de servicio. Síntomas • No se puede escuchar el sonido a través de los altavoces. • El receptor no funciona en absoluto. •...
  • Page 67 Síntomas • Se generan ruidos. • Se requiere mayor tiempo de lectura (“READING” permanece parpadeando en la pantalla). • Las pistas no se reproducen en el orden de reproducción intentado por usted. • El tiempo de reproducción transcurrido no escorrecto. •...
  • Page 68 Síntomas • El sonido se interrumpe u omite durante la reproducción de un dispositivo de audio Bluetooth. • No se puede controlar el dispositivo de audio conectado. • La calidad del sonido cambia cuando se reciben emisoras HD Radio. • El sonido no se escucha. •...
  • Page 69 Síntomas • El texto “CALL 1-888-539-SIRIUS TO SUBSCRIBE” (llame al 1-888-539-SIRIUS para suscribirse) se desplaza por la pantalla mientras escucha la radio SIRIUS. • El sonido no se escucha. Aparece “UPDATING” en la pantalla. • Aparece “NO SIGNAL” en la pantalla. •...
  • Page 70 • La marca Bluetooth y sus logotipos son propiedad de Bluetooth SIG, Inc., y cualquier uso de los mismos por Victor Company of Japan, Limited (JVC) se realiza bajo licencia. Otras marcas y nombres comerciales son de sus respectivos propietarios.
  • Page 71: Mantenimiento

    Mantenimiento Cómo limpiar los conectores Un desmontaje frecuente producirá el deterioro de los conectores. Para reducir esta posibilidad al mínimo, limpie periódicamente los conectores con un palillo de algodón, teniendo cuidado de no dañar los conectores. Conectores Condensación de humedad Podría condensarse humedad en el lente del interior de la unidad, en los siguientes casos: •...
  • Page 72: Especificaciones

    Especificaciones SECCIÓN DEL AMPLIFICADOR DE AUDIO Salida de potencia: 20 W RMS × 4 canales a 4 Ω y ≤ 1% THD+N Relación señal a ruido: 80 dBA (referencia: 1 W en 4 Ω) Impedancia de carga: Gama de control de tono: Respuesta de frecuencias: Nivel/impedancia salida línea: Nivel/impedancia salida subwoofer:...
  • Page 73 SECCIÓN DEL REPRODUCTOR DE CD Tipo: Sistema de detección de señal: Número de canales: Respuesta de frecuencias: Gama dinámica: Relación señal a ruido: Lloro y trémolo: Formato de decodificación MP3: (MPEG1/2 Audio Layer 3) Formato de decodificación WMA (Windows Media® Audio): GENERAL Requisitos de potencia: Sistema de puesta a tierra:...

This manual is also suitable for:

Kd-s26

Table of Contents