Clarion NZ503 User Manual page 213

HOW-TO GUIDE: How to start using Naviextras Toolbox (connecting navigation device and
logging in)?
This Guide explains the very first steps of using Toolbox: how to connect your navigation
device to your PC and how to log in with your username and password.
After Naviextras Toolbox has been started, you will see the main page. The toolbar on the
top of the page informs you that no device is connected:
So the initial steps are:
1. Connect your navigation device (or PDA navigation software) to your PC.
2. Make sure your PC is connected to the internet.
3. Click the 'Not logged in' icon or the Login button to log in with your username and
password.
Let's see them one by one:
1. Connect your navigation device (or PDA navigation software) to your PC.
If you have a PND (portable navigation device), normally you should have received a USB
cable in the box. Use this to connect your device to your PC.
If you are using a PDA version of the supported navigation software (iGO My way 8), you
should put the SD-card into an SD card reader. Alternatively, if your PDA supports mass
storage protocol data transmission, you can also choose to connect your PDA to your PC
with a USB cable.
You can switch your PDA to Mass Storage Protocol connection in Start menu / Settings /
Connections (tab) / USB to PC screen (if your device supports it).
(If your PDA model does not have this setting screen, then it does not support Mass Storage
Protocol connection, and you should insert your SD card into an SD card reader.)
When your device is successfully connected and Naviextras Toolbox finds it in the list of
supported devices, the device (or software) name will appear at the top of the Toolbox
window.