Table of Contents
Advertisement
Chapter 2 Hardware Installation
2.1
Diagram of connecting hardware to WE-1110
The WE-1110 is a portable and convenient wireless solution for the traveling business person
delivering 802.11g wireless connectivity with a maximum wireless signal rate of up to 54Mbps.
Use it in conference rooms, hotel rooms, or even at hotspots. The Wireless Pocket
Router/AP might be small in size, but huge in functionality, supporting multiple operation
modes, including Access Point (AP) mode, Router mode, and Wireless Client mode. You can
switch among these modes easily by using the WE-1110's 3-way configuration slide switch.
Moreover, there are 2 USB ports support with WE-1110; user can plug the USB devices
including Flash Disk, Web Camera and MFP (including printer, scanner, and cardreader).
Warning: Before remove the slide switch, please power-off the router firstly. Moreover,
please stay over 5 seconds between power-off / power-on condition.
2.1.1
Router Mode Hardware connection and application
When NES Mini Server Router with MFP switches to Router Mode, there will be each WAN
and LAN port existing, the administrator can do the Quick Setup including WAN Setup, LAN
Setup, Wireless Setup, USB Disk Management Setup, User Account Management Setup,
Firewall Setup, QoS Setup, FTP Server Setup, Web Camera Setup, Samba Server Setup,
Audio Server Setup, MFP Server Setup, System Time Setup and Password Setup.
2.1.2
AP Mode Hardware connection and application
Under AP Mode, it supports 2 LAN ports as Bridge, and user can connect to NES Mini Server
Router with MFP via LAN port or Wireless (WDS). The administrator can do the Quick Setup
24
Advertisement
Table of Contents
