The following screen displays.
2.
In the Utility list, select Traceroute.
3.
Specify the following parameters for the traceroute utility.
•
Target. The IP address or host name of the computer you are tracing.
•
Max Hops. The maximum number of hops to allow when tracing the route.
•
Data Size. The input the size (in bytes) of the packet.
•
Base Port. The port number to send the packet to.
•
Resolve Host. Select on to resolve the host name to the IP address.
4.
Click Start Test.
The traceroute results display.
To clear the results from the display:
Click Clear Results.
DS Throughput Utility
To display the ????????????, run the DS throughput utility.
To run a DS throughput test:
1.
From the Advanced tab, select Administration > Diagnostics.
C3000 WiFi Cable Modem Router
Administration
44